DS-1: 24K Yellow Gold Plating Solution, Brush Gel, for Gold Electroplating

With each order you are getting 15 mL of 24K yellow gold (brush) electroplating gel.  It is intended for brush plating on small conductive projects with a wide range of voltage.  This solution (gel) is highly concentrated with a 5.0 grams of fine gold content per liter.  It provides a quick deposition of 24K gold with rich colors. 

Small package allows clean operation and prevents possible contamination that results in large waste.  With an easy setup and cleanup, this makes your gold plating job a breeze.  All you need is a (variable) DC power supply, a conductive brush, and a few wires to get the project going.

All orders are filled by highly trained chemists to guarantee the quality of delivered product (free from contamination).

This chemical is in a gel form to prevent running on brush plating to save the precious gold chemicals.  Please check out the pictures for some simple instructions.  It does not contain any free cyanide to keep your work environment safer.  If the solution (gel) ever gets dryer due to evaporation over the time, simply adding drops of distilled water will restore the applicability.  Do not thin the gel too much as it may become watery and runny.  Do NOT place any metal objects in this solution directly.

It can be simply apply by a stainless steel (or graphite) wand with an absorbent tip or sleeve using a basic electroplating setup.  You are welcome to ask questions before and after purchase.

This is a professional grade chemical mixture and requires applicable working knowledge and safety awareness to use.  You are responsible for the safe and legal use of this chemical after delivery. Avoid direct skin contact and do not ingest.  Always use electroplating chemicals in a well ventilated area.  In case of contact, wash with soap and water immediately to avoid possible chemical allergies.